Cupping System

Stroke:

Outer: 3° Inner: 5° Angular Stroke Displacement Between Slides: 65° (Outer Slide Leads)

Tooling:

Die set Max Dimensions: 84” x 44” (2134mm x 1118mm)

Shut heights (SDAU):

Outer Slide: 19.00” (482.60mm) Inner Slide: 24.611” (625.11mm) (Including 2” Magnet) Inner Slide Adjustment: +0/0.787” (+0/-20mm) from SDAU

Weight:

40 Metric Tonnes (Including Die Set)

Low pressure Compressed air required for cup blow off:

2 x 2" Supply Pipes 50psi 750 ACFM 25°c

High pressure Compressed air required for cup blank clamping:

G3/4” Connection 100psi 50 ACFM 25°c

Scrap hood vacuum requirements:

2900 ACFM 125mmH2O

Press dimensions:

Height: 4200mm Width: 4700mm Depth: 2750mm

Cooling water Requirements:

Flow rate 80 -100L/min Temperature: 150C - 200C

Voltage:

400 > 480v

Supply:

3 phase

Frequency:

50/60HZ

Full Load current:

328A

Control voltage AC:

110vac

Control voltage DC:

24vdc

Bed width:

2130mm

Tooling Capacity:

16 die stations

Maximum Coil width:

1820mm

Strokes per minute:

Production speed: 100-300spm

AutoBAR™:

20spm